THE LEGACY OF PERFECTION
29
®
FULL-FACE HELMET
TECHNICAL INFORMATION Standards: Snell M2015, DOT-218 Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Weight: 3.9 lbs / 1770 grams (approx) Packaging: Individually wrapped, bagged, and boxed, six per master carton • Q.R.S.A. base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal • The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces • Optional, Pinlock ® -ready CWF-1 two-dimen- sional racing shields with tear-off posts are available • Scratch-resistant coating • 99.9% protection from harmful UV A & B rays • Optional, CW-1 Pinlock ® prepared shields are available to accommodate Pinlock EVO ® Fog Free Inserts • Optional tinted shields available • A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop the shield open to increase airflow Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel and professional riders’ feedback • Dual-Layer EPS liner enhances impact absorption and ventilation • A third generation Tail Fin, integrated into the bottom rear beading in combination with the Shell-Integrated Spoiler, allows smooth airflow that reduces drag and lift Variable Ventilation System • Top outlet vent is separate from the Shell- Integrated Spoiler, allowing it to be positioned for optimum flow-through ventilation • Four rear outlet vents allow for adjustment of airflow based on riding position • Enlarged lower air intake/defroster vent reduces shield fogging and increases ventilation • The rear/neck outlets allow for effective air exhaust Lightweight Advanced Integrated Matrix Plus (AIM+) • High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid, and resilient Interior System • The entire interior lining (cheek pads, crown liner, and chin strap covers) is easily removed to allow cleaning • Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit, and comfort • Eyeglass compatible interior • Breath guard and chin curtain included • Optional ear pads and optional cheek pad sizes available • Upper air intake vent is positioned to maximize air volume into the helmet’s interior Standard Chin Strap Snap • Neatly secures chin strap CW-1 Shield and Q.R.S.A. System
MATTE BLACK
BLACK MSRP $477.99 MATTE BLACK MSRP $501.99
Compatible with
Fog Resistant System
AVAILABLE IN 3XL SIZE ONLY
BLACK
®
Sizes: Matte Black 3XL 0113-0105-09 0113-0135-09 Black
REPLACEMENT SHIELDS & LENSES
CWR-1, CW-1, CNS-1 Pinlock EVO ® Lens Clear CW-1 Shield Hi-Def Orange CW-1 Clear Shield w/Pinlock ® Pins CW-1 Shield Hi Def Yellow w/Pinlock ® Pins CW-1 Shield Dk. Smoke w/Pinlock ® Pins CW-1 Shield Lt. Smoke w/Pinlock ® Pins CWF-1 Pinlock ® Shield w/Tearoff Posts Clear 0213-9500-00 CWF-1 Pinlock ® Shield w/Tearoff Posts Hi Def Yellow 0213-9503-00 CWF-1 Pinlock ® Shield w/Tearoff Posts Dk Smoke 0213-9505-00 0209-9800-00 0213-9106-00 0213-9400-00 0213-9403-00 0213-9405-00 0213-9415-00
1-800-421-7247 www.helmethouse.com
toll free / online /
Please Note: Replacement parts for these helmets may be found on page 74.
©2019 Helmet House, Inc
Powered by FlippingBook